GAC Engine Speed Control Unit Speed Controller Droop Governor EG2000

Additional information

The EG2000 is a universal generator governor / engine speed controller equipped

with Smoke Limiting, & Idle Speed. Suitable for diesel, gas and natural gas engines with

Built-in & Non-Built-in PTs Pumps, also can be used with Low Current, Electric over

Hydraulic Oil Pumps Type Governor Actuators.

Features

*Works on a wide ranges of MPU/flywheel frequencies

*15 Amp Max Output

*Suitable for all types of diesel and Gas engines

*High Sensitivity and stable at Low Frequency Variations

*Moisture, vibration, and rust protected, Epoxy encapsulated electronics

*For Use With Isochronous Generators & Automatic Paralleling PLC controls

*Idle Speed Adjustment and connections for a Remote Speed POT

EG2000
Operating Voltage	12 or 24 VDC ±20%
Output Current	0.5 ~ 15 A
Run Speed Adjustment range	Speed adjustment Potentiometer (30 turn); 4 Segment Dip Switch Adjustable From 600 ~ 9500 Hz.
Idle Speed Adjustment Range	Run Speed 30 ~ 85%
Ramp Time	3 ~ 20 Sec
Remote Speed Pot	Ext. Remote speed pot terminal 6, 7, 8 (ILS) and 6, 7, 9 Connect a 5K potentiometer ±5% adjustment range.
Temp. Stability	<0.01%
Run Speed Stability	± 0.25 % at steady state
MPU input signal	1 ~ 120VAC RMS
Droop	4.00%
Adjustment	Run Speed, Idle Speed, Ramp Time, Droop, Integration, Gain
Mechanical Vibration	1G @ 18 ~ 30 Hz, 2.5G @ 48 ~ 70 Hz
Relative Humidity	< 95%
Operating Temperature	-40 ~ 85°C
Storage Temperature	-40 ~ 85°C
Dimensions	147mm L * 114mm W * 50mm H
Weight	690g ± 2%