Skip to Store Area:

Genset Parts Store

DeepSea 3110 Genset Controller

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

DeepSea 3110 Genset Controller

Be the first to review this product

Availability: In stock.


Quick Overview

Main Features

* Back-lit LCD display
* Remote start input
* Electronic engine enabled
* Magnetic pick-up
* Full engine monitoring and protection
* PC programmable
* Protected Solid State Outputs (PSS)
* 6 Digital inputs
* 4 Outputs (2 configurable on magnetic pick-up version, 4 configurable on Canbus version)


* Hours counter provides accurate information for monitoring maintenance and warranty periods
* Multiple engine parameters are monitored simultaneously
* Suitable for engine only applications
* Module can be configured to suit individual applications
* IP65/Nema 12 rating offers advanced resistance to water ingress (Gasket required)
* No need for additional metering equipment
* Wide range of engines can be specified
* Uses the DSE Configuration Suite PC Software for simplified programming



* The engine is started using the Start button on the front of the module
* Once pressed the module instructs the engine to initiate its pre-heat sequence and then start the engine
* To stop the engine the Stop button on the front of the module should be pressed


* The Auto button needs to be pressed to put the unit in Auto Mode
* The module start sequence is initiated by the activation of the remote start input
* The pre-heat sequence is then initiated and the engine is started
* To stop the engine the remote start signal needs to be removed or the Stop button on the module needs to be pressed

Important Notes

Electronic Engine Compatibility

* Cummins
* Deutz
* John Deere
* Perkins
* Scania
* Volvo
* Generic
* Plus additional manufacturers
Add Items to Cart Add to Cart

The DSE3110 can be utilised as a Manual or Auto Start Module for single generating set applications and forms part of DSE's next generation of control modules. The module has been designed to work with electronic and non-electronic engines providing advanced engine monitoring and protection features.

The DSE3110 includes a back-lit LCD display which clearly shows the status of the engine at all times. The module monitors engine speed, frequency, voltage and run hours and also displays the warning and shutdown status of the engine.

The module includes six digital inputs and four outputs. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software.

The module is available in two variants: Magnetic Pick-up and Canbus.
Add Your Tags:
Add Tags
Use spaces to separate tags. Use single quotes (') for phrases.